Posts tagged with ‘sintering’

  • Thermal Characterization of the SLS Print Bed Using Infrared Thermography
    sharebotus4:44 pmJune 10th, 2026

    Thermal Characterization of the SLS Print Bed Using Infrared Thermography

    Thermal Characterization of the SLS Print Bed Using Infrared Thermography Experimental study conducted on the Sharebot Snowwhite 2 with...

    0
  • Optimizing PBT Powder Processing in SLS with SnowWhite2 HT
    sharebotus9:00 amMay 5th, 2026

    Optimizing PBT Powder Processing in SLS with SnowWhite2 HT

    Optimizing PBT Powder Processing in SLS with SnowWhite2 HT This report analyzes the Selective Laser Sintering (SLS) performance of...

    0
  • Beyond High-Performance: Low-Melt biopolymers on the Sharebot SnowWhite²
    sharebotus5:34 pmApril 30th, 2026

    Beyond High-Performance: Low-Melt biopolymers on the Sharebot SnowWhite²

    The Sharebot SnowWhite² powder bed fusion system uniquely supports both high-temperature engineering polymers and low-melt thermoplastic powders (melting point...

    0
  • Snowwhite2 HT printing BASF PA6
    sharebotus10:53 amApril 28th, 2026

    Snowwhite2 HT printing BASF PA6

    Optimization of BASF PA6 Thermoplastic Printing Parameters on SnowWhite2HT This technical summary outlines the optimized printing protocol developed by...

    0
  • Why choose Snowwhite2
    sharebotus5:25 pmApril 20th, 2026

    Why choose Snowwhite2

    Why choose SnowWhite2 for Research & Development? Start Printing in Minutes – SnowWhite2 heats up quickly, allowing researchers to begin...

    0
  • Sintering Polycaprolactone
    sharebotus9:10 amMarch 2nd, 2025

    Sintering Polycaprolactone

    Sintering Polycaprolactone (PCL)   Polycaprolactone (PCL) is a biodegradable and biocompatible polyester widely used in biomedical applications due to...

    0